How To Maintain The Mould Of The Glass Bottle

During the production process, the glass bottle mold will produce ash and oxidized plaque after being burned by high temperature and release agent. If it is not cleaned in time, it will cause great damage to the mold, so the maintenance of the mold is particularly important.

There are only two ways to maintain the mold, sandblasting and washing the mold method:

Sandblasting and cleaning the mold is very harmful to the mold. The high-pressure gas sprays quartz sand in the mold cavity to clean the mold, and then polishes it with a grinder, and touches the butter to prevent rust.

After a long time of practice, it is finally believed that the water-washing mold has less damage to the mold's finish and the mold. The water-washing mold uses high-pressure gas to drive the quartz sand and water flow, which has a good cleaning effect and little wear.

Most glass bottle manufacturers now use the washing method to clean and maintain the mold.